The Invaders Saucer Filming Miniature – Information Provided by Tom Strong

Below is the only known photo (thus far) of The Invaders filming miniature, shown here courtesy of Tom Strong…. via Mike Makkreel

The following information was also collected by Tom. Much of it comes from the actual people involved in the creation of the saucer, and who were interviewed in the 90’s. That information has been cross-referenced with those involved who are still surviving, and would appear to be the most accurate picture of the creation of the filming model.:
The 4-foot Invaders saucer studio model was made by Production Models Shop, the same people responsible for making the original Star Trek 11 ft. Enterprise model.
Filming was done by the Howard Anderson Co., the firm which also did the special effects for The Invaders series.
Volmer Jensen may have been the modelmaker for The Invaders saucer, along with Mel Keys and possibly Vern Sion. In past publications and books, Richard Datin (another modelmaker at Production Models Shop) has been wrongly credited with making the original filming model. In fact, after the series was started, Richard Datin was commissioned to make a small desktop sized Invaders saucer, which was given to Quinn Martin by the Howard Anderson Co.
The filming model had interior lighting that created that circling effect in the upper dome, although it had more windows surrounding the top dome than did the Aurora model.

It also had fader lights that lit the bottom engine area. The bottom 5 domes were an aqua green with a red orange central bottom light (which was not textured or gridded like the Aurora model).
Where the top dome met the flared area there was only one one ridge on the studio model, as opposed to the Aurora model which has three.
No legs existed for the studio model. Instead there were lines drawn on the bottom of the craft, where the legs would be, to make it look as though they were retracted. The scenes of the landed saucer in the series were always a combination of the saucer model, the real full size legs (with ladders), and the bottom base (with entrance hatch). Also, the real leg base had a periscope type device that came out of the bottom.
As the Aurora model isn’t exact to the series filming model, one good assumption is that Aurora used the studio press release images to work out the look and dimensions for their model.
The Aurora model’s console room was based upon the 1st Season saucer set. The rest of the saucer was either based upon an unbuilt set or was an interpretation of the possible saucer interior.
An unconfirmed story suggests that the filming model was never paid for and was retrieved when the series was cancelled.
Though the saucer used for filming was thought to have been wooden, that has yet to be positively confirmed. There is still a chance that it could have been fiberglass, like the original Star Trek Enterprise.The investigation continues.
Any information about this miniature or about the TV show’s working arrangement with Aurora Plastics would be appreciated. Please contact me by clicking on my Contact Artist Button Link below.

Mel Keys was the sole model maker on the Saucer because the rest of the Productions Model Shop crew was on vacation when the work came through for it. That’s the main saucer shell, that was vacuum formed on a buck. That’s Mel in the image. Photo was taken by his mother with a Polaroid camera. The plastic used was Ryolite.

The model story about it not being paid for is related to a new refurbishing of the model and not when it was originally built. It was sent out after the series in the 70’s to be restored. It was never picked up or paid for and still resides at the shop were it was restored. Sadly, at a later date the holder of it gutted the electrical wiring and lights inside it to make it lighter and hang it in his shop. It is still there today.

 

ABOVE: Isao Hirai with the Invaders Saucer

 

In Addition, Here is Some Interesting Speculation:
“How does the Flying Saucer Fly?..”

The Haunebu was a classic flying saucer designed by the Nazis in 1945 a dome and windows on the top. with one large dome underneath .
David Childress – Author –  Technology of the Gods

Stories of the war. tells us that the Nazis had obtained a flying saucer that gave them a advanced technology that they developed, right up until the end of the war..
Jim Marrs – Author –  The Rise of the Fourth Reich

The theory was that it sort of contained “Ball Lighting” is what it was. These balls/domes would produce electrons and positrons, and the positrons would migrate to the top of the saucer and levitate it…
Henry Stevens – AuthorHitler’s Flying Saucers..

Like the Hollywood Invaders saucer, having windows on the top and five domes on the bottom… The idea came from this real saucer, from 1945 “The Haunebu,” So now you know how the Invaders Saucer would Levitate, and powered for warp drive in the red core….
Mike Makkreel – Invader Model Builder..

 

Tom Strong

2012_NEW_MMM_BANNER_CONTACT_ARTIST_BUTTON_290X50

**

Mike Makkreel

2012_NEW_MMM_BANNER_CONTACT_ARTIST_BUTTON_290X50

USA

**

David Childress

USA

**

Jim Marrs

USA

**

Henry Stevens

USA

 

*****************************

Statements made, or views expressed may NOT be the views of Modeler’s Miniatures & Magic

Pricing and Availability are subject to change by the Kit Maker/Vendor or Artist at any time. Modeler Magic is not responsible for maintaining the prices in accordance to the changes made by the Kit Maker/Vendor or Artist.

Professional Customer Service and Quality Control are the responsibility of the Kit Maker/Vendor or Artist selling the item of which Modeler Magic is only showing for them.

Modeler’s Miniatures and Magic has no professional or monetary affiliation with any kit makers, vendors or artists shown on this site other than showing the works and offerings those Artists, Kit Makers and Vendors wish to show on Modeler Magic in their own names. Modeler Magic promotes the art form in this way. Modeler’s Miniatures and Magic claims no trade marks or copyrights on anything shown on it’s site other than it’s own created artwork presented. Modeler Magic reserves the right to remove any material shown at any time from anyone, and we will follow all legal aspects of the art form as they are presented to us by the proven legal owners of the above stated materials and/or their court appointed representatives.

Post break