HAUNTED HOUSE LIGHTING KIT
Simulated Fire Effect
On /Off Room Lighting
To visit the VooDooFX site direct, please click the banner link above.
To contact VooDooFX direct regarding this kit,
please click the CONTACT ARTIST link below.
SEAVIEW Lighting Kit
$49.99 + Shipping
Pro 24 Driver Board
9 Volt Battery Hook Up / On/Off Switch
14-Custom Leds / Expandable up to 24
Hook Up Wire / Shrink Tubing
Customer Support Line
Full Interior Lights
Nose Light / Tail Fin Lights / Sail Light /Dead Lights /Missile Light
To contact the KIT PRODUCER direct, please click the CONTACT [...]
1:12 SPINNER Electronics Kit
$175.00 + Shipping
24 Port driver board
2 Special effects boards
36 High output Leds
Here is a link to the news page www.voodoofx.com/news.htm
Built to go in the fantastic Randy Cooper Kit (Seen Here), this electronics package is exactly what one needs to bring this piece to life!
To contact the KIT PRODUCER direct, [...]
(NEW RELEASE 2012 FROM VOODOOFX)
We are proud to release the “Raider Lighting Kit” add on electronics kit, designed and fit for Moebius Models Cylon Raider. The kit comes with everything you will need to light the model kit, 100% Led system for cool running and longer longevity.
This kit does require electronic skills, electronic experience [...]
(NEW RELEASE 2011 FROM VOODOOFX)
We are proud to release the “Tripod Lighting Kit” add on electronics kit, designed and fit for Pegasus Model Kit #9005. The kit comes with everything you will need to light the model kit, 100% Led system for cool running and longer longevity.
This kit does require electronic skills, [...]
(NEW RELEASE 2011 FROM VOODOOFX)
Voodoofx & Roberts engineering are proud to release the official “Uncle Martin Space Ship” add on electronics kit, designed and fit for Pegasus Model kit #9012. The kit comes with everything you will need to light the model kit, 100% Led system for cool running and longer longevity.
This kit does require [...]
Not only bridging the professional modeling worlds, but also proving the fact that CG modelers can also be outstanding physical modelers is right here with our newest shown artist… Mr. Zachary Brackin of The Z-Axis! His attention to detail on this formerly produced Hunk of Junk Productions (Tony Lamb) kit is outstanding! And then adding [...]
Speeder Bike Diorama
Donated to a Museum!
Hello! My name is Randy Neubert of VoodooFX! Here is some history behind this one of a kind custom Speeder Bike & Diorama for sale. This build up job was started in mid 2003 as a project build for are local model club and personal build for [...]
I simply cannot get enough of this fantastic scratch build of Master Modeler Jason Ware’s! It is a true masterpiece and now with this latest HD Video, people will be able to appreciate it more than ever!
View even more on this great piece by clicking HERE!
This is one of my favorite designs of Star Destroyers from Star Wars. When Revell released this kit I thought it to be small… like when MPC released the Imperial Star Destroyer originally decades ago. However, now viewing what this kit may look like when done by a professional… well let’s just say I am [...]
I am honored today to be able to introduce a builder to this Gallery who has been inspirational to me in his talents, proving that dreams ARE achievable! Professional Photographer, and Model Master Jason Ware. Using some of the reference shown directly from this site through the Mark Dickson Collection, and using some dramatic lighting [...]
NEW RELEASE 2010 FROM VOODOOFX
Made for the MOEBIUS Models Viper Mk II
Voodoofx, Roberts Engineering & R Fox Electronics are proud to release “The Space Fighter II” electronics lighting kit. Designed and fit tested, the kit comes with everything you will need to light the model it is a 100% Led system on [...]
I have the honor of introducing another great artist to this Gallery…. Michael Bilbrey! When I first saw this diorama of his…using BOTH the Martian War Machine AND the Tri-Pod for this memorable scene…. I thought it genius! It is the first I have seen using the menacing vehicles from two different telling’s of [...]
(NEW RELEASE 2010 FROM VOODOOFX)
Voodoofx & Roberts Engineering have designed the ultimate electronics kit. VOXLK-1 gives all the parts to light up your hand prop in one custom designed lighting package. The hardware including battery system fits all inside the model kit with light modification to prop, that’s down right amazing! [...]
Nebulizer Electronics Kit
Number of Pieces: 10
Payment Method: PayPal
PayPal Address: email@example.com
NEW RELEASE 2010 FROM VOODOOFX
Voodoofx & Roberts Engineering have designed the ultimate electronics kit. Be the first one on the block to have a studio accurate prop, “It’s down right amazing”
Kit Includes: [...]
This 1:96 behemoth was built from the fantastic Randy Cooper Kit by master modeler Chris Kelley! We covered some of the build process HERE. It turned out beautiful…. and much like the actual filming miniature! Chris took extra care to be exact with everything, and added a special background making this build an amazing [...]
This incredible build was done from the fantastic, and HUGE Robert Burns kit that was mastered by the well known artist Alfred Wong, and then cast and built by Teejay Lasher. This piece is simply put… beautiful! Master artist Teejay Lasher spared nothing in making this piece as close to the original filming model [...]
Talk about perfection! This Randy Cooper Sandcrawler kit was masterfully built by well known professional modeler Chris Kelley! I have to say that after viewing this piece, and comparing it to the original studio model used in Star Wars – A New Hope, this is the best version of this piece I have viewed [...]
I saw this and my jaw dropped wide open! The realism is fantastic… and the lighting is incredible! From the small switchboards to the rotating lights on the bottom of the saucer (see film clip below) professional modeler Randy Neubert of VooDooFX has outdone himself yet again! Made from the amazing MOEBIUS Models kit, and [...]
I have been watching this magnificent artist, Rob McFarlane, as he masterfully created this piece from the MOEBIUS Models kit. Not only is it perfect, but he has the approval (as you can see in the photos) from the designer of the original Irwin Allen filming model himself…. Academy award winning Art-Director William Creber! Rob’s [...]
This is only the second showing of master artist Mark Swilley and I am already impressed with his work! This studio scale RED 3 X-wing is another from the fantastic MSLZ22 Models kits that are currently our of production. Mark’s interpretation of this Red 3 is beautiful! I especially love his weathering on this piece! [...]
Made for a friend at Christmas time from the amazing MSLZ22 kit (now out of production), master modeler Cory Harvey again shows us his fantastic skills in modeling! His usual technique is simple and effective in every way! Another beautiful piece from professional modeler Cory Harvey!
CURRENTLY The V3 Studio X-Wing Kit is UNAVAILABLE. For inquiries [...]
I have the honor of again introducing another fantastic artist to this Gallery… modeler Mark Swilley! Using the fantastic studio scale kit mastered by Cory Harvey (SEEN HERE), and sold by Monkey Works, modeler Mark Swilley did amazing work in his build of this fantastic piece! His choice of color is right on the [...]
Master Modeler Chris Kelley is back and better than ever wit this new release!
Tie Advance X-1
Producer: Chris Kelley
Number of Pieces: 45
Price: $350 Kit / $45 Stand
Payment Method: PayPal
PayPal Address: firstname.lastname@example.org
To view the kit pieces up close… just click on the photo…
This is a studio scale version [...]
Imperial Avenger-Class Destroyer
Producer: Sci Fi Dynamics of Anigrand
Number of Pieces: 82
Price: $238 US
Shipping: $58 US
Payment Method: PayPal, Credit Card, Money Order
82 resin parts + photo-etching parts.
Span 466mm (18.3″)x Length 711mm (28″)
Due to the extremely fine details, the mold normally so fragile for [...]
ON THE AUCTION BLOCK!… Going… Going…. GONE!… To a lucky collector in Germany!
Built from the fantastic NICE-N Model Designs Kit, fantastic modeler Jerry Stipp built this RED Y-Wing using the same methods that the original ILM Team used in building theirs for the Star Wars movies. A beautiful piece thatjust sold in auction! A lucky [...]
I have the great honor today of introducing back a well known artist that has been away for a while from this industry.. professional modeler Chris Kelley! Chris is known for his excellent works in kit patterning and outstanding build services! Here you can see his build of the Randy Cooper Tantive Kit. Lit [...]
This beautiful build was done by a professional modeler new to this Gallery… Chris Rogerson! Fantastically built from the Moebius Models Kit, master modeler Chris Rogerson left no detail unattended….. from the ultra smooth, and correct, outer color, to the perfect interior! This could be used for filming! A fantastic piece from Chris Rogerson. Please [...]