Modelers Miniatures and Magic

All Collections of Tobias Richter – The Light Works
SITE: http://www.thelightworks.com

KIT & COLLECTOR ALERT!
STAR TREK
The Wrath of Khan
NCC-1864 RELIANT
DeBoer Hulls “NorthStar” Kit
I was recently contacted by artist Scott Boon, whom informed me that communications have been opened between his client and Dennis DeBoer about possibly re-tooling, then releasing the giant Reliant “NorthStar” kit once again. This is a large kit in scale with the massive [...]

I love this artist’s works! Once again Rob has come to us with a fantastic piece for a poster featuring The Wrath of Khan! The actual Reliant you see on the poster was utilized from the Tobias Richter photos of the DeBoer Reliant he had built for his own collection by famed artist Tim Ketzer! [...]

//

Slowly regaining his senses… as consciousness takes hold, the Master Jedi begins to hear again the blasts and crackling of the fire about him. Now fully coming around from getting knocked out by the pillar that collapsed on him after a laser bolt hit it, he realizes he is in great pain. Both his [...]

Master artist Tobias Richter, of well known site The Light Works, has done it again with this fantastic build from a rather difficult, and rare kit patterned and made by Tobias Rubom. I know the fit of this kit was most challenged because I am a proud owner of one myself and know what it [...]

//

This incredible build was done from the fantastic, and HUGE Robert Burns kit that was mastered by the well known artist Alfred Wong, and cast by Teejay Lasher. Master modeler, and digital art genius Tobias Richter very much gave a a treat in this build making it look very much like the original filming [...]

Built from the highly accurate studio scale NICE-N Model Designs TIE Fighter Kit, professional artist and collector Tobias Richter shows that Collectors may have skills as well… and certainly the eye for great artwork!
To inquire into Tobias Richter’s services, please click on the banner link below…

For inquiries into NICE-N Model pattern services, please click the [...]

//

Shown earlier as the fantastic Randy Cooper kit build from professional modeler Tim Ketzer, we now show this piece again as being from the collection of The Light Works own Tobias Richter!
To inquire into Mr. Ketzer’s services, please click his banner link below…

To inquire into Tobias Richter’s services, or questions of this collection piece, [...]

Beautifully built from the AMT/ERTL kit, modeler Daniel Kochlowski did a fantastic job building this piece for the collection of Tobias Richter.
Here is what Tobias had to say…
This one was built by a good friend. It´s a metal kit, so no “sanding” or puttying is done, but due to the material is has already a [...]

//

Built from the Alfred Wong mastered kit that is now offered through Monkey Works, professional modeler Tobias Richter again shows his great skills in this hobby!
Here is what Tobias had to say…

A very nice kit made by Master Pattern Maker Alfred Wong. Very clever thought out structure. It´s just a shame that the clear [...]

Another beautiful build by Christian Söder from a kit offered by Monsters in Motion. This fine piece resides in the well known collection of Tobias Richter!
Here is what Tobias had to say…
I found this kit a couple of years ago at a local store and immediately bought it (despite the hefty price tag). I turned [...]

Built from the Revell Germany kit, professional modeler did an outstanding job!
Here is what Tobias had to say…
Another nice pre-painted kit from Revell Germany. Just some metal touchup to get rid of the typical plastic look and some weathering and rust added.

Again I don’t have the words for this masterfully built CG model… the U.S.S. Enterprise for the new, upcoming release of Star Trek – The Movie. Absolutely stunning work from Tobias Richter!
For inquiries for more of Tobias Richter’s work, please click the banner link below…

2010 UPDATE: View Tobias Richter’s FINAL version of the New Enterprise [...]

I don’t have the words for this masterfully built CG model… the U.S.S. Kelvin for the new, upcoming release of Star Trek – The Movie. Tobias really showed his professionalism with this piece!

Beautifully built from the Revell kit, professional modeler and collector Tobias Richter (of The Light Works) masterfully made this piece fantastic!
Here is what Tobias had to say…
This is the only “real” kit of the last Star Wars movie done by Revell. The model is excellent, very detailed with sharp castings – a real pleasure to [...]

Built from the pre-paint Revell Germany kit, Tobias added his usual excellence in making this piece shine!
Here is what he had to say…
A very nice design and a very nice model coming from Revell Germany. This is a prepainted kit, so not much painting to do except a little metal touch up to get rid [...]

//

Built from a kit, Tobias built this piece to resemble the CG model used in the television series!
Here is what Tobias had to say…

The vinyl is very soft, so I fear the long tentacles will sag over time. I did glue some metal support rods inside of them – hope that´ll help it.
I first [...]

//

Built from the excellent re-release, and slight re-master of  the Captain Cardboard kit produced by Atomic City, this beautiful X-wing was built as RED 4 from  Star Wars by Tobias Richter. This is rare because of it being RED 4! It is quite the pleasure to see an artist do a piece rarely seen. [...]

Built from the Halcyon kit, professional modeler Tobias Richter, of The Light Works, did a wonderful job in re-creating this escape vehicle from the movie ALIEN.
Here is what Tobias had to say…
This is the escape capsule which Ripley used to get away at the end of “Alien”. The kit is very nice, although there are [...]

//

Offered as an SMT kit, professional modeler Alfred Wong mastered and built this kit, then sold it to Tobias Richter for his collection. A beautiful piece!

//

Built from the large Korbanth Model kit, Tobias gave this piece exactly what it needed… the massive, and ominous spirit of the “Executor”!
Here is what Tobias had to say…

This is quite a big kit compared to the 30cm kit by Scale Solutions. Naturally, it has much more detail.
Thanks to a detailed description, the assembly was [...]

This beautiful piece was built by two model masters! Alfred Wong and Tobias Richter (who is also the owner of this great piece). Alfred mastered and built this beautiful Millennium Falcon while Tobias Richter scratch built the base it sits upon. A wonderful piece in an already impressive collection!
Here is what Tobias had to say…

The [...]

//

Built from a WARP Models resin kit, Christian Soder did a wonderful job capturing the look of the famed Klingon Bird of Prey. This piece went into the collection of Tobias Richter, whom also took the fantastic photos of it.
Here is what Tobias had to say…

I got this heap of resin from a friend, [...]

Built from an unknown large scale kit, Tobias made this Excelsior Class Starship a fantastic piece for his collection!

//

Built from a Product Enterprise kit, Tim Ketzer built the beautiful Eagle from Space 1999 for the Collection of Tobias Richter! An outstanding piece!

//

Built from a NICE-N Model Designs Kit, Tobias Richter of The Light Works did a masterful job bringing this AT-ST to life!
Here is what Tobias had to say…

The AtSt is, like the bigger AtAt, one of the most popular designs of the Star Wars universe.
In late 2007, Steve Neisen made this beautiful kit of the [...]

Built from a fiberglass kit, Tobias Richter of The Light Works did amazing work in replicating the Studio Model.
Here is what Tobias had to say…

The Klingons are probably one the most well known Alien race in modern Science Fiction. And the D7 cruiser is their most successful
ship design – the basic lines stayed unchanged for [...]

//

Built from his own made kit, modeler Richard Long, of Sovereign Replicas, did amazing work in his replication of the original filming model. Yet another great piece added to the collection of Tobias Richter of The Light Works!
Here is what Tobias had to say about this piece…

The Klingons are probably one the most well [...]

//

Built from a Sovereign Replicas Kit, Tobias Richter, of The Light Works, did amazing work with this piece!
Here is what Tobias had to say…

This is the Studio Scale Kit of the Original Star Trek series Romulan Bird of Prey, made by Richard Long. It was my first fiberglass kit – and it was not [...]